How do you check voltage with a digital clamp meter?
How to make voltage measurements
- Select Volts AC or Volts DC, as desired.
- Plug the black test probe into the COM-input jack.
- Touch the probe tips to the circuit across a load or power source (in parallel to the circuit).
- View the reading, being sure to note the unit of measurement.
How do you read the amp on a clamp meter?
To measure ac current using a flexible current probe:
- Connect the flexible current probe to the meter.
- Connect the probe’s flexible tubing around the conductor.
- Keep the probe coupling more than 1 inch (2.5cm) away from the conductor.
- Turn the dial to the icon.
- View the current value in the display.
How do you test amps with a clamp multimeter?
What is the function of the zero button on the clamp ammeter?
Clamp meter buttons diagram
| 1 | Hold: Freezes the display reading. Reading is released when button is pushed a second time. |
|---|---|
| 4 | Zero: Removes DC offset from DC current measurements. This button sometimes appears in yellow and doubles as the shift button, corresponding to yellow functions scattered around the dial. |
How to use the clamp meter to test the insulation?
Set the rotary switch of the clamp meter to the 2000MΩ range. In this condition, it is normal that the reading is unstable. 2. Insert the three banana plugs V/Q, COM, EXT of the insulation tester unit to the correspondin g V/Q, COM, EXT input jacks on the clamp meter. 3.
What is a 266 meter?
266 266 C 266C + 260 D 266 F 266FT 6 INTRODUCTION The meter is a portable, 3-1/2 digits LCD clamp meter with insulation test function (with optional 500V insulation tester unit), designed for being used by electricians, technicians, serviceman and hobbyists who need an instrument that is accurate, reliable, and always ready for use.
Can I use the K type thermocouple provided with the meter?
The K Type Thermocouple provided with the meter is a present, it is not professional and can only be used for non-critical reference measurements. For accurate measurements, use a professional thermocouple.
What is the value displayed on the LCD of the clamp?
The value displayed on the LCD is the AC current flowing through the conductor . Insulatio n Resistanc e Test 1. Set the rotary switch of the clamp meter to the 2000MΩ range. In this condition, it is normal that the reading is unstable. 2.